UniFi OS Consoles Wi-Fi Switching Camera Security Phone System Door Access Accessories UISP

UniFi Video is an obsolete product line.

This application and its related devices will no longer receive any manner of technical support, including functional and security updates. Additionally, there will be no further updates to Help Center content pertaining to UniFi Video.

UniFi Protect - G4 Doorbell Wiring Diagrams

We recommend installing the G4 Doorbell with the standard wiring of one G4 Doorbell, one chime and one transformer (or the G4 Doorbell Power Supply, available on the US store only); or no chime with the chime function disabled.

More complex installations are supported, but correct wiring may depend on deployment-specific characteristics not covered in these diagrams. Any advanced configurations should be conducted by a qualified electrician.

Before you begin the wiring process, separate the G4 Doorbell wires into left and right as shown in the images below.

mceclip9.png mceclip10.png

One G4 Doorbell and one transformer

mceclip3.png

Warning: If there is no chime present, you must disable the chime function during setup to avoid damaging the device.

One G4 Doorbell, one transformer and one chime

mceclip4.png

One G4 Doorbell, one doorbell, one transformer and one chime

mceclip5.png

Two G4 Doorbells, one transformer and one chime

mceclip6.png

Two G4 Doorbells, two transformers and one chime

mceclip7.png

One G4 Doorbell, one transformer and two chimes

mceclip8.png

 

Was this article helpful?
28 out of 49 found this helpful