Layer 3 adoption is the process of adopting a UniFi device to a remote UniFi Network Application. This is only recommended for advanced users, or those adopting devices to the UniFi Cloud Console.
- Your WAN port is connected to the Internet.
- The LAN to which your devices are connected should have Internet access.
L3 Adoption Methods
UniFi Network Mobile App (Cloud Console only)
- Refer to our UniFi Device LED Status guide to ensure the device is in a factory-default state.
- Connect your mobile device to the same local network as your UniFi device.
- Open your UniFi Network Mobile App and connect to your Cloud Console.
- Your device should appear for adoption.
- Make sure your device is in a factory-default state. You can refer to our UniFi Device LED Status guide.
- SSH into the device. You may refer to our guide on how to Login with SSH.
- Issue the following command: set-inform http://ip-of-host:8080/inform
- The UniFi device will now show up for adoption and can be treated as a standard L2 adoption.
DHCP Option 43
This option leverages your DHCP server to inform your UniFi device of the location of your remote Network Application host. Those with a UniFi Gateway can easily accomplish this by entering the IP address of the remote Network Application in Option 43 Application Host Address field located in the Network Settings.
For those using a third-party gateway or DHCP server, we recommend consulting your manufacturer’s documentation to learn more.
You'll need to configure your DNS server to resolve 'unifi' to your remote UniFi Network Application host.
There are two methods of specifying the Network Application host:
- IP Address: http://ip-address:8080/inform
- Fully Qualified Domain Name (FQDN): http://FQDN:8080/inform
Migrating From Another Network Application
A Layer 3 migration is useful for moving devices from a current Network application to a new Cloud Console. See Backups and Migration for more information.