Assigning UniFi Access Devices to a Separate VLAN

UniFi Access allows you to enhance security by optionally isolating Access devices on a dedicated VLAN, preventing communication with the main network. For a standard UniFi Access setup guide, click here.

Creating a VLAN for Access Devices

1. Navigate to Network application > Settings > Networks > Create New.
2. Follow the on-screen instructions. Learn more

Changing Access Control Hub's Port Network

1. Navigate to Network application > UniFi Devices and select the console/switch to which the Access Control Hub is connected.
2. Navigate to Overview > Port Manager > select a port > Native VLAN / Network and select the network you just created.
3. Click Apply Changes.

Assigning Static IP Address to Access Devices (Optional)

1. Navigate to Network application > UniFi Devices and select an Access device.
2. Navigate to Settings > IP Settings > Fixed IP Address and enter the IP address.
3. Click Apply Changes.
4. Repeat the steps for all Access devices.

Note: If the IPs are not updated in Network application > UniFi Devices, try unplugging the Ethernet cable and plugging it back in.

Updating Network Settings in UniFi Access

1. Navigate to Access application > Settings > General > Network.
2. Select a network from the dropdown menu and click Apply Changes.