Provisioning UniFi G3 Phones With Zoom Phone
UniFi G3 phones are certified for Zoom Phone and support zero-touch provisioning (ZTP). Phones provision directly from Zoom and are managed through the Zoom web portal. No UniFi Console or UniFi Talk application is required.
Requirements
- A supported UniFi G3 phone: G3 Touch Enterprise, G3 Touch Pro, or G3 Touch Wall.
- A firmware version supported by Zoom Phone.
- A Zoom Phone account with permission to add and manage phones.
- A network with DHCP, DNS, and NTP available.
- Network access that meets the firewall requirements for Zoom Phone.
Supported models use AES-256 call media encryption by default and support mutual TLS. For the current list of certified models and supported firmware versions, see Zoom Phone Certified Hardware.
Provisioning
- Sign in to the Zoom web portal and go to Admin Center > Product configuration > Phone system > Phones & Devices.
- Add the phone using its model and MAC address, printed on the phone’s label. For detailed instructions, see Managing phones and devices.
- If the phone was previously used, reset it to factory defaults. A factory reset is required to trigger provisioning on a previously used phone.
- Connect the phone to the network. It will automatically provision from Zoom.
Note: Add the phone to the Zoom web portal before powering it on for the first time or resetting a previously used phone.
For more information, see Getting started with provisioning desk phones.
Support
- Provisioning, account, or Zoom Phone service issues: Contact Zoom Support.
- Phone hardware or firmware issues: Contact UI Support.
To configure Zoom Phone through UniFi Talk Relay, see Using UniFi G3 Phones with Zoom through UniFi Talk Relay.