This article explains the features available when deploying the UFiber WiFi ONU (UF-WIFI).
The UFiber WiFi ONU
The UFiber WiFi ONU (UF-WIFI) is able to provide both wired and wireless connectivity to connected clients. The ONU supports four GigabitEthernet RJ45 ports for wired connectivity and provides wireless connectivity using the 802.11n standard.
The UFiber OLT configures the bridged mode and the wireless configuration options on the UFiber WiFi ONU.
Many different devices can be connected to an ONU to provide connectivity and features for users. See the Getting Started article for more details.
In the example setup above, the UF-WIFI will be used to provide both wired and wireless connectivity to several clients. The OLT will be used to configure the Bridged mode and provides the wireless SSID options to the ONU. See the ONU Router Mode article for more information on how to configure the Router mode instead. Follow the steps below to modify the ONU settings using the OLT Web UI:
1. Navigate to the ONU list tab and select the UFiber WiFi ONU.
2. Select the CONFIGURE button to modify the ONU mode and VLAN settings.
Admin password: <secret>
VLAN > Port 1-4 > Native VLAN: <vlan-id>
VLAN > Port 1-4 > Tagged VLANs: <vlan-ids>
VLAN > WiFi > Native VLAN: <vlan-id>
3. Define the wireless settings.
WiFi is enabled: Checked
Hide SSID: <optional>
Security WPA2PSK: Checked
WPA2PSK password: <wifi password>
Channel: auto | custom
Channel width: 20 | 40 Mhz
Tx power: 100% | 50% | 25% | 12% | 6%
Country: <country name>
To view the MAC addresses of all connected (wired) devices, hover over the ONU in the ONU list tab and select the Get connected devices option. To view the MAC addresses, connection time, Tx/Rx rates and signal strength of all connected (wireless) devices, select the Get WiFi clients option: