UniFi Gateway - Port Remapping

Remap WAN and LAN ports to flexibly assign your UniFi gateway's primary and secondary Internet connection to RJ45 or SFP+ ports.

Note: Link Aggregation (LAG) is not available on UniFi gateway LAN ports.

Remap the WAN and LAN ports

  1. Navigate to Settings > Internet.
  2. Ensure the new WAN port has an active connection to prevent losing Internet connectivity.
  3. Assign the new port.
  4. If you are swapping WAN1 and WAN2, assign a temporary port value to enable the transition.
  5. Apply the changes.

Note: If an Internet connection appears offline or does not have an IP address assigned, then please verify that your WAN settings match those provided by your ISP.

Was this article helpful?
200 out of 666 found this helpful