This article describes the input voltage supported as well as power required for the different airFiber models. Please verify each device's Data Sheet and Quick Start Guide before installing.
Table of Contents
Input and Power Table
|AF-5X||Lower than 04:18:D6:E3:08:E9||+19Vdc to +25Vdc||Up to 15 Watts|
|AF-5X||04:18:D6:E3:08:E9 or higher||+19Vdc to +54Vdc||Up to 15 Watts|
|AF-2X||Any date code||+23Vdc to +54Vdc||Up to 17 Watts|
|AF-3X||Any date code||+23Vdc to +54Vdc||Up to 17 Watts|
|AF-4X||Any date code||+23Vdc to +54Vdc||Up to 17 Watts|
|AF-11FX||Any date code||+32Vdc to +54Vdc||Up to 35 Watts|
|AF-24||Any date code||+42Vdc to +58Vdc, -48Vdc||Up to 50 Watts|
|AF-24HD||Any date code||+42Vdc to +58Vdc, -48Vdc||Up to 50 Watts|
|AF-5/5U||Any date code||+42Vdc to +58Vdc, -48Vdc||Up to 40 Watts|
|AF-5XHD||Any date code||+19Vdc to +54Vdc||Up to 15 Watts|
- Only AF-24, AF-24HD, AF-5/5U support -48V power source.
- Original airFiber 5X design only supported 24Vdc input. However units with MAC address 04:18:D6:E3:08:E9 or higher support input voltages +19Vdc to +53Vdc.
- Since airFiber 2X, 3X and 4X have been released after AF-5X, all AF-2X/3X/4X models support up to +53Vdc. But, since it consumes slightly higher power, it requires higher minimum voltage +23Vdc.
- The AF-11FX comes with a DC input connector, so it can be powered via PoE and/or direct DC cable using the DC input connector.