×

EdgeSwitch XP - Enable Passive PoE Output

Overview

Readers will learn how to enable Passive PoE output on the interfaces of an ES-XP.

NOTES & REQUIREMENTS:
Applicable to the latest EdgeSwitch XP firmware on the following models:
  • ES-5XP
  • ES-8XP
  • ES-16XP
Device used in this article:

How to enable the PoE Output

Back to Top

GUI: Access the ES-XP Web UI.

1. Navigate to the Dashboard  dashboard.png  tab.

2. Select the Configure  settings.png  option to enter the Advanced settings for a port.

3. Change the PoE mode by choosing between the following options (depending on the ES-XP model):

  • Off No PoE output.
  • 24V Passive PoE output using 24V.
  • 48V Passive PoE output using 48V.
WARNING:Make sure that a compatible PoE device is plugged into the port before enabling the Passive PoE output.

4. Apply the changes by clicking on the SAVE button.

Was this article helpful?
1 out of 3 found this helpful
Can't find what you're looking for?
Visit our worldwide community of Ubiquiti experts for more answers
Visit the Ubiquiti Community