Help Center Help Articles Professional Support Community RMA & Warranty Downloads Tech Specs

EdgeSwitch - SFP/SFP+ and DAC Compatibility List

Overview

This article provides a list of Ubiquiti and third party SFP and SFP+ modules that are compatible with the EdgeSwitch (ES).

NOTES & REQUIREMENTS:
Applicable to the EdgeSwitch (ES) models. Please see the Related Articles below for more information.

This article does not apply to the EdgeSwitch X (ES-X) and EdgeSwitch XP (ES-XP) models.

Ubiquiti SFP/SFP+ Modules and DAC Cables

Back to Top

Ubiquiti branded SFP/SFP+ modules and DAC cables are officially supported and compatible with all EdgeSwitch, EdgeRouter, UFiber, UniFi Switch and UniFi Security Gateway models which use SFP or SFP+ ports. 

Fiber SFP modules (1 Gbps)

  • UACC-OM-MM-1G-D-2 (formerly UF-MM-1G)
  • UACC-OM-SM-1G-S (formerly UF-SM-1G-S)

Fiber SFP+ modules (10 Gbps)

  • UACC-OM-MM-10G-D (formerly UF-MM-10G)
  • UACC-OM-SM-10G-D (formerly UF-SM-10G)
  • UACC-OM-SM-10G-S (formerly UF-SM-10G-S)

Copper SFP modules (1 Gbps and 10 Gbps)

  • UACC-CM-RJ45-1G (formerly UF-RJ-45-1G)
  • UACC-CM-RJ45-10G (formerly UF-RJ-45-10G)

DAC cables (10 Gbps)

  • UACC-DAC-SFP10-0.5M (formerly UDC-0.5)
  • UACC-DAC-SFP10-1M (formerly UDC-1)
  • UACC-DAC-SFP10-2M(formerly UDC-2)
  • UACC-DAC-SFP10-3M (formerly UDC-3)

Third-Party SFP/SFP+ Modules and DAC Cables

Back to Top

The list below includes third-party SFP/SFP+ transceivers that have been tested by community members. Please note that these should work, but we cannot assure that they will. Some modules will have multiple hardware revisions, and while one revision may work (i.e. 1.0), it's possible that a newer revision (i.e. 1.1, 1.2, etc.) of the same module may not work. It is also possible that these modules will work with one model (such as the ES-16-XG) but not with another model. Please note that Ubiquiti only offers direct support for Ubiquiti branded SFP/SFP+ modules and DAC cables.

You can also find more information about compatible modules and cables in our community forums (this thread specifically).

NOTE: Not all third-party modules support DDM/DOM (Digital Diagnostic Monitoring/Digital Optical Monitoring) therefore data like Tx and Rx levels and other information will not be shown for those modules in the SFP/SFP+ statistics.

SFP and SFP+ modules

  • Addon 1000BASE-LX SFP MMF
  • Addon 1000BASE-SX SFP MMF
  • Black Box LFP412
  • Brocade 10G-SFPP-TWX-0101
  • Cisco DS-SFP-FC-2G-SW
  • Cisco GLC-LH-SM 30-1299-01 SFP
  • Cisco GLC-SX-MM
  • Cisco GLC-SX-MM 1000BASE-SX SFP
  • Cisco GLC-SX-MMD
  • Cisco GLC-T - (CISCO-FINISAR FCMJ-8521-3-CSC Rev 4)
  • Cisco SFP-H10GB-CU1M
  • Dell FTLF1318P3BTL
  • Dell FTLF8519P2BNL
  • Dell FTLX1371D3BCL
  • Dell FTLX8571D3BCL
  • Delta LCP-1250RJ3SR - (DELTA LCP-1250RJ3SR Rev 0000) 
  • FCI 10110818-2030LF
  • Finisar FTLF8524P2BNL
  • HP J4858C
  • HP J4859B - (Finisar FTRJ1319P1BTL-PT Rev A)
  • HP J4859C - (Intel TXN221200000005) - no OTDR output
  • HP J4858A (3rd party) - (FINISAR FTRJ-8519-7D) - no OTDR output
  • MaxxWave MX-SX-MM-US 10G + 1.25G
  • MGB SX 1000Base-SX
  • MikroTik S-3553LC0D
  • MikroTik S+31DLC10D
  • MikroTik S+85DLC03D
  • Molex 74742-0001
  • Solid-Optics SFP-GE-L-SO 1000Mbps
  • TP-LINK TL-SM311LM
  • TP-LINK TL-SM311LS

Direct Attached Copper (DAC)

  • 10Gtek SFP-H10GB-CU1M (1M)
  • 10Gtek CAB-10GSFP-P2M (2M)
  • 10Gtek CAB-10GSFP-P3M (3M)
  • 10Gtek CAB-10GSFP-A5M (5M)
  • Addon 330-3965-A (1M)
  • Cisco SFP-H10GB-CU1M (1M)
  • ENET SFC2-CICI-1M-ENC (1M)
  • Fiberstore SFP-10G-DAC-1M*CO (1M)
  • HP CN26FX40RC JD096C (1.2M)
  • Juniper EX-SFP-10GE-DAC-1M - (Amphenol 584990001 Rev A)
  • Macroreer Passive DAC
  • MikroTik S+DA0001 (1M)
  • Rollball RSP30-10S-CU1M (1M)

Related Articles

Back to Top

EdgeRouter - SFP/SFP+ and DAC Compatibility List

EdgeSwitch - SFP/SFP+ Interface Options

Was this article helpful?