×

UniFi Video is an Obsolete product line.

For more information, please see Ubiquiti's Vintage and Obsolete Products.

airMAX - Long Range PtP Link Mode

NOTE:This article applies to airMAX M devices. For airMAX AC devices, please see: airMAX - ACK Distances for airMAX AC.

When should the Long Range PtP Link Mode be enabled?

In a normal airMAX outdoor network, stations send an acknowledgment frame (ACK) after receiving a data frame. However, with longer link distances, it becomes necessary to disable the ACK mechanism. The distance at which the Long Range PtP Link Mode (or PtP noack mode in older versions) should be enabled is dependent on bandwidth in the following way:

  • 40MHz: 16.5 miles (26.5 km)
  • 20MHz: 35.6 miles (57.3 km)
  • 10MHz: 72.3 miles (116 km)
  • 5MHz: 144.7 miles (232.9 km)

How to Enable Long Range PtP Link Mode

Enable the Long Range PtP Link Mode (PtP noack mode in older versions) in the airMAX tab, under Settings.

long_range_PtP.png

Was this article helpful?
62 out of 89 found this helpful

Submit an RMA request

Visit the Ubiquiti RMA portal to submit a warranty claim for your Ubiquiti device.

Visit the RMA portal >

Plan your UniFi Deployment

Use the Design Center to design your UniFi Network using the most suitable products.

Try the UniFi Design Center >

Talk to other Ubiquiti users

Visit our worldwide community of Ubiquiti experts for more answers and solutions.

Ask the Ubiquiti Community >