×

UniFi Video will reach end-of-support on December 31st, 2020.

For more information, please refer to the official community notice.

airMAX - Resetting to Factory Defaults Via SSH

To reset and airMAX unit to factory defaults via SSH / CLI, log into the airMAX unit and run the following as one command:

 cp /usr/etc/system.cfg /tmp/system.cfg; save; reboot

The output should look like this:

Screen_Shot_2019-09-11_at_2.19.13_PM.png

NOTE:Once the radio reboots, it can be accessed on its default IP address of 192.168.1.20, provided you are on the same subnet and local to the radio.

Related Articles

Intro to Networking - How to Establish a Connection Using SSH

Was this article helpful?
30 out of 49 found this helpful