UniFi Video is an obsolete product line.

This application and its related devices will no longer receive any manner of technical support, including functional and security updates. Additionally, there will be no further updates to Help Center content pertaining to UniFi Video.

Intro to Networking - Free Space Path Loss (FSPL)


As a radio signal leaves the transmitter antenna, it undergoes a phenomenon known as Free Space Path Loss (FSPL) or Path Loss. Path loss explains that as a signal propagates through space, it expands outward, resulting in a reduction in power levels. While true of all radio signals, higher frequency signals (e.g., 5 GHz) undergo greater path loss compared to lower frequency signals (e.g., 2.4 GHz). For this reason, outdoor wireless networks favor 5 GHz PtP backhaul, since path loss and EIRP are favorably-balanced for ultra-long distance links. Conversely, short distance links with ultra high-throughput favor higher frequency links like airFiber 24 GHz. Link Power Budgets consider TX/RX antenna gain and TX power as ways to compensate for path loss.


For this reason, lower frequency signals are particularly susceptible to in-band interference from neighbor networks, as signals may 'over-propagate' beyond the desired coverage area. To limit the impact of potential in-band interference by unwanted signals, keep transmitter power levels low and use the most directive antenna for the target application (i.e., semi-directional sectors instead of omni-directional antennas).

Path Loss Calculation

The amount of loss a signal can incur is twofold dependent on the 1- the frequency/wavelength of the signal, and, 2- the distance from the point reference traveled by the signal (e.g., distance from the transmitter).

The actual calculation for free space path loss is modeled by the following formula: FSPL (dB) = [(4πd)/λ]^2


Was this article helpful?
58 out of 75 found this helpful